Normally Closed Industrial Proximity Sensor With Load Short Circuit Protection
Features
Red LED checks the state of the proximity witch
High repeated positioning accuracy
Wide voltage range
Anti vibration, dust, water and oil prevention
Reverse power protection, short circuit protection, directly connecting with PLC
Details
Two-wire
NPN/PNP
Normally closed
DC
Parameter
| Lag distance |
Less than 10% of the detection distance |
| Detecting objects |
Magnetic metal (detection distance is reduced when non-magnetic metal) |
| voltage |
DC : DC 12~24 (6~36V) pulse (p-p) below 10% |
| AC : AC 110~220V (36~250V) 50/60Hz |
| Current consumption |
N.P : ≤13mA |
| D : ≤0.8mA |
| A : ≤1.7mA |
| Control output |
N.P : ≤300mA |
| D : ≤200mA |
| A : ≤400mA |
| Loop protection |
N.P.D : reverse connection protection, surge absorption, load short circuit protection |
| A : surge absorption |
| Ambient temperature |
-30~+65°C (no icing, no condensation) |
| Ambient humidity |
-35~95%RH |
| Insulation resistance |
50MΩ or more (DC500 megohmmeter) (between charging part and housing) |
| Withstand voltage |
AC 1000V 50/60HZ 1min (between charging part and Housing) |
| Temperature effect |
-30~+65°C: detection distance error ±15% at +23°C |
| -25~+60°C: detection distance error ±10% at +23°C |
| Voltage effect |
6-36V (90-250V) : ±15% of detection distance error |
| 10-30V (220V) : ±10% of detection distance error |
| Protection level |
IP67 (IEC) |
| Material |
Housing: ABS |
| Detection surface: ABS |
Note:Please read the "Precautions" of the product manual before use.
About maintenance and overhaul
In order to keep the proximity sensor to work stably for longtime, the following regular examinations should be performed just like general control
1. Check the installation position of detected object and proximity sensor if any deviation,loosening or deformation exists.
2. Check the attached wires and connecting parts if any loosening,bad contact or wire breaking off exists.
3. Check if there is any metallic powder accumulation or not.
4. Check if the temperature condition and surrounding environment condition are normal or not.
5. Check if the detection distance is normal or not.
Company Introduction
Zhongde adheres to the "service for survival, innovation and development" business philosophy and "people-oriented" development strategy, with a good working environment and career development platform to condense talent, and strive to create innovative development-oriented enterprises, while establishing a common The core team of the goal, efficient and orderly operation process, energy-saving, environmentally safe and reliable electrical products, serving the power automation industrial control business.
Product Tags:
|
|
Normally Closed Industrial Proximity Sensor With Load Short Circuit Protection Images
|
